Release Announcements ===================== This is the fifth release candidate of Samba 4.16. This is *not* intended for production environments and is designed for testing purposes only. Please report any defects via the Samba bug reporting system at https://bugzilla.samba.org/. Samba 4.16 will be the next version of the Samba suite. UPGRADING ========= NEW FEATURES/CHANGES ==================== New samba-dcerpcd binary to provide DCERPC in the member server setup --------------------------------------------------------------------- In order to make it much easier to break out the DCERPC services from smbd, a new samba-dcerpcd binary has been created. samba-dcerpcd can be used in two ways. In the normal case without startup script modification it is invoked on demand from smbd or winbind --np-helper to serve DCERPC over named pipes. Note that in order to run in this mode the smb.conf [global] section has a new parameter "rpc start on demand helpers = [true|false]". This parameter is set to "true" by default, meaning no changes to smb.conf files are needed to run samba-dcerpcd on demand as a named pipe helper. It can also be used in a standalone mode where it is started separately from smbd or winbind but this requires changes to system startup scripts, and in addition a change to smb.conf, setting the new [global] parameter "rpc start on demand helpers = false". If "rpc start on demand helpers" is not set to false, samba-dcerpcd will refuse to start in standalone mode. Note that when Samba is run in the Active Directory Domain Controller mode the samba binary that provides the AD code will still provide its normal DCERPC services whilst allowing samba-dcerpcd to provide services like SRVSVC in the same way that smbd used to in this configuration. The parameters that allowed some smbd-hosted services to be started externally are now gone (detailed below) as this is now the default setting. samba-dcerpcd can also be useful for use outside of the Samba framework, for example, use with the Linux kernel SMB2 server ksmbd or possibly other SMB2 server implementations. Certificate Auto Enrollment --------------------------- Certificate Auto Enrollment allows devices to enroll for certificates from Active Directory Certificate Services. It is enabled by Group Policy. To enable Certificate Auto Enrollment, Samba's group policy will need to be enabled by setting the smb.conf option `apply group policies` to Yes. Samba Certificate Auto Enrollment depends on certmonger, the cepces certmonger plugin, and sscep. Samba uses sscep to download the CA root chain, then uses certmonger paired with cepces to monitor the host certificate templates. Certificates are installed in /var/lib/samba/certs and private keys are installed in /var/lib/samba/private/certs. Ability to add ports to dns forwarder addresses in internal DNS backend ----------------------------------------------------------------------- The internal DNS server of Samba forwards queries non-AD zones to one or more configured forwarders. Up until now it has been assumed that these forwarders listen on port 53. Starting with this version it is possible to configure the port using host:port notation. See smb.conf for more details. Existing setups are not affected, as the default port is 53. CTDB changes ------------ * The "recovery master" role has been renamed "leader" Documentation and logs now refer to "leader". The following ctdb tool command names have changed: recmaster -> leader setrecmasterrole -> setleaderrole Command output has changed for the following commands: status getcapabilities The "[legacy] -> recmaster capability" configuration option has been renamed and moved to the cluster section, so this is now: [cluster] -> leader capability * The "recovery lock" has been renamed "cluster lock" Documentation and logs now refer to "cluster lock". The "[cluster] -> recovery lock" configuration option has been deprecated and will be removed in a future version. Please use "[cluster] -> cluster lock" instead. If the cluster lock is enabled then traditional elections are not done and leader elections use a race for the cluster lock. This avoids various conditions where a node is elected leader but can not take the cluster lock. Such conditions included: - At startup, a node elects itself leader of its own cluster before connecting to other nodes - Cluster filesystem failover is slow The abbreviation "reclock" is still used in many places, because a better abbreviation eludes us (i.e. "clock" is obvious bad) and changing all instances would require a lot of churn. If the abbreviation "reclock" for "cluster lock" is confusing, please consider mentally prefixing it with "really excellent". * CTDB now uses leader broadcasts and an associated timeout to determine if an election is required The leader broadcast timeout can be configured via new configuration option [cluster] -> leader timeout This specifies the number of seconds without leader broadcasts before a node calls an election. The default is 5. REMOVED FEATURES ================ SMB1 CORE and LANMAN1 protocol wildcard copy, unlink and rename removed ======================================================================= In preparation for the removal of the SMB1 server, the unused SMB1 command SMB_COM_COPY (SMB1 command number 0x29) has been removed from the Samba smbd server. In addition, the ability to process file name wildcards in requests using the SMB1 commands SMB_COM_COPY (SMB1 command number 0x2A), SMB_COM_RENAME (SMB1 command number 0x7), SMB_COM_NT_RENAME (SMB1 command number 0xA5) and SMB_COM_DELETE (SMB1 command number 0x6) have been removed. This only affects clients using MS-DOS based versions of SMB1, the last release of which was Windows 98. Users requiring support for these features will need to use older versions of Samba. No longer using Linux mandatory locks for sharemodes ==================================================== smbd mapped sharemodes to Linux mandatory locks. This code in the Linux kernel was broken for a long time, and is planned to be removed with Linux 5.15. This Samba release removes the usage of mandatory locks for sharemodes and the "kernel share modes" config parameter is changed to default to "no". The Samba VFS interface is kept, so that file-system specific VFS modules can still use private calls for enforcing sharemodes. smb.conf changes ================ Parameter Name Description Default -------------- ----------- ------- kernel share modes New default No dns forwarder Changed rpc_daemon Removed rpc_server Removed rpc start on demand helpers Added true CHANGES SINCE 4.16.0rc4 ======================= o Jeremy Allison * BUG 14737: Samba does not response STATUS_INVALID_PARAMETER when opening 2 objects with same lease key. o Jule Anger * BUG 14999: Listing shares with smbstatus no longer works. o Douglas Bagnall * BUG 14996: Fix ldap simple bind with TLS auditing. o Andrew Bartlett * BUG 14995: Use Heimdal 8.0 (pre) rather than an earlier snapshot. o Volker Lendecke * BUG 14989: Fix a use-after-free in SMB1 server. o Stefan Metzmacher * BUG 14865: Uncached logon on RODC always fails once. * BUG 14984: Changing the machine password against an RODC likely destroys the domain join. * BUG 14993: authsam_make_user_info_dc() steals memory from its struct ldb_message *msg argument. * BUG 14995: Use Heimdal 8.0 (pre) rather than an earlier snapshot. o Joseph Sutton * BUG 14995: Use Heimdal 8.0 (pre) rather than an earlier snapshot. CHANGES SINCE 4.16.0rc3 ======================= o Samuel Cabrero * BUG 14979: Problem when winbind renews Kerberos. o Björn Jacke * BUG 13631: DFS fix for AIX broken. * BUG 14974: Solaris and AIX acl modules: wrong function arguments. * BUG 7239: Function aixacl_sys_acl_get_file not declared / coredump. o Andreas Schneider * BUG 14967: Samba autorid fails to map AD users if id rangesize fits in the id range only once. o Martin Schwenke * BUG 14958: CTDB can get stuck in election and recovery. CHANGES SINCE 4.16.0rc2 ======================= o Jeremy Allison * BUG 14169: Renaming file on DFS root fails with NT_STATUS_OBJECT_PATH_NOT_FOUND. * BUG 14938: NT error code is not set when overwriting a file during rename in libsmbclient. o Ralph Boehme * BUG 14674: net ads info shows LDAP Server: 0.0.0.0 depending on contacted server. o Pavel Filipenský * BUG 14971: virusfilter_vfs_openat: Not scanned: Directory or special file. o Volker Lendecke * BUG 14900: Regression: Samba 4.15.2 on macOS segfaults intermittently during strcpy in tdbsam_getsampwnam. * BUG 14975: Fix a crash in vfs_full_audit - CREATE_FILE can free a used fsp. o Stefan Metzmacher * BUG 14968: smb2_signing_decrypt_pdu() may not decrypt with gnutls_aead_cipher_decrypt() from gnutls before 3.5.2. o Andreas Schneider * BUG 14960: SDB uses HDB flags directly which can lead to unwanted side effects. CHANGES SINCE 4.16.0rc1 ======================= o Jeremy Allison * BUG 14911: CVE-2021-44141: UNIX extensions in SMB1 disclose whether the outside target of a symlink exists. o Ralph Boehme * BUG 14914: CVE-2021-44142: Out-of-Bound Read/Write on Samba vfs_fruit module. * BUG 14961: install elasticsearch_mappings.json o FeRD (Frank Dana) * BUG 14947: samba-bgqd still notifying systemd, triggering log warnings without NotifyAccess=all. o Stefan Metzmacher * BUG 14867: Printing no longer works on Windows 7 with 2021-10 monthly rollup patch. * BUG 14956: ndr_push_string() adds implicit termination for STR_NOTERM|REMAINING empty strings. o Joseph Sutton * BUG 14950: CVE-2022-0336: Re-adding an SPN skips subsequent SPN conflict checks. KNOWN ISSUES ============ https://wiki.samba.org/index.php/Release_Planning_for_Samba_4.16#Release_blocking_bugs ####################################### Reporting bugs & Development Discussion ####################################### Please discuss this release on the samba-technical mailing list or by joining the #samba-technical IRC channel on irc.freenode.net. If you do report problems then please try to send high quality feedback. If you don't provide vital information to help us track down the problem then you will probably be ignored. All bug reports should be filed under the Samba 4.1 and newer product in the project's Bugzilla database (https://bugzilla.samba.org/). ====================================================================== == Our Code, Our Bugs, Our Responsibility. == The Samba Team ======================================================================